SY - SB-**-F single band repeater. Optional power 10-23dBm
Overview:
SY-SB**-F single system Full Band signal repeater series are designed for the customers indoor coverage solution.
They are used in the some hot sites, where sgnal of mobile operators service is too low.
Using the full band repeater can easily realize the fast coverage.
Customer could use it to amplify all operators in selected band. All people living and working in building also visitors can use all operators service in this band.
This is not consumer level repeater. This is industrial repeater with high quality technologies.
Repeater fully and completelly complies CE directives. We guarantee all parameters compliance to required standards.
Operation Frequency band:
LTE800
GSM900 & EGSM
DCS1800 / LTE1800
WCDMA2100 UMTS2100/ LTE2100
LTE2600
and so on.
Features:
1.Industrial repeater technology provides high level out of band rejection. With IF SAW filter technology for good out of band rejection, this full band repeater is designed in the same high level way as industrial band selective repeater.
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3. 31dB MGC (Manual gain control) 1dB per step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. Auto shut off function automaticly shuts down power in case of overload or interferences.
Specifications:
Electrical specification
Band
Model
Uplink
Downlink
Frequency range MHz
Optional by order
L8
LTE800
SY-SB**-L8F
791 -821
832 -862
G
GSM
SY-SB**-GF
890 -915
935 -960
E
EGSM
SY-SB**-EF
880 -915
925 -960
D
DCS
SY-SB**-DF
1710 - 1785
1805 - 1880
W
WCDMA
SY-SB**-WF
1920 - 1980
2110 - 2170
L26
LTE2600
SY-SB**-L2F
2500 - 2620
2570 - 2690
Maximum coverage
Model
Uplink
Downlink
MaxGain
≤ 200- 500 m2
SY-SB10-**F
≥ 60dB
≥ 65dB
≤ 500-1000 m2
SY-SB15-**F
≥ 65dB
≥ 65dB
≤ 1000-2000 m2
SY-SB20-**F
≥ 65dB
≥ 70dB
≤ 2000-3000 m2
SY-SB23-**F
≥ 70dB
≥ 75dB
MaxOutput Power
≤ 200- 500 m2
SY-SB10-**F
≥ 10dBm
≥ 10dBm
≤ 500-1000 m2
SY-SB15-**F
≥ 12dBm
≥ 15dBm
≤ 1000-2000 m2
SY-SB20-**F
≥ 15dBm
≥ 20dBm
≤ 2000-3000 m2
SY-SB23-**F
≥ 20dBm
≥ 23dBm
Band width (-3dB)
By band L8,G,E,D,W,L26
30, 25, 35, 75, 60, 120 MHz
MGC (Step Attenuation)
≥ 31dB / 1dB step
Automatic Level Control
≥ 20dB
Gain Flatness
≤3dB(P-P)
Noise Figure
≤6dB
VSWR
≤1.8
Group Delay
≤5μs
LED Alarm
Standard
Power LED
Green light when power on.
ALC LED
Orange @ ALC 1~5dB
Red @ ALC 20dB~25dB
Mechanical Specifications
Standard
I /O Port
N-Female
Impedance
50 ohm
Operating Temperature
-25ºC~+55ºC
Environment Conditions
IP40
Dimensions
250x165x52mm
Weight
≤ 2.5Kg
Power Supply
Input AC90~264V
Output DC10V / 3A
OMT Software, Local Monitoring & Remote Monitoring via wireless Modem
Optional via USB Port and via SMS
5. Optional monitoring function can do locally (by USB) monitoring and controlling operation of repeater. In case if there are installed many repeaters, distributor can remotely (by wireless cellular modem) monitor and controll through it's monitor module by OMT or OMC Software. (Optional) Software is free of charge and does not requires subscription fee.
GSM, 3G ir 4G kartotuvų - stiprintuvų instaliavimui reikalinga licenzija. Naudojimą privaloma suderinti su mobiliojo tinklo operatoriumi ir gauti oficialų leidimą įrenginio įjungimui į operatoriaus mobilųjį tinklą. Mes įrengsime stiprintuvą legaliai ir suderinsime su transliuotoju.
Antenos
Mobile network repeaters 
